High Quality Wholesale TC NBR Oil Seal TC FKM Oil Seal Rubber Oil Seal Manufacturer

 　　Oil seal is mainly used to seal media with pressure. It has advantages when sealing low viscosity and gaseous media.

　　TC type oil seal is double lip (one main lip and one auxiliary lip), one spring, and the steel framework is completely wrapped by rubber. It is used in the situation of low pressure, one side has sealing medium and the other side has slight dust. The maximum pressure is 0.03mpa (0.3kgf / cm2).

　　Nitrile rubber, with a service temperature of minus 40 ° to 125 °, is resistant to mineral oil and has good wear resistance. It is most used in oil seals, but it cannot be used in ketone and lipid polar solvents.

　　There are more than 5000 models of nitrile rubber, with sufficient inventory.


Comments

Post a Comment

Popular posts from this blog

How FVMQ O Rings Enhance Equipment Reliability in Harsh Conditions

Image
In the real world of industrial supply chains, certain products attract attention only when something goes wrong. O-rings are a good example. Most operators don’t think about them until a leak disrupts production or an engine refuses to start in cold weather. FVMQ O-rings have become part of that hidden insurance policy for many sectors, particularly where low temperature and chemical exposure meet head-on. Consider the automotive aftermarket. A fuel injector seal exposed to aggressive gasoline blends in Northern Europe faces both chemical attack and freezing winter mornings. Traditional silicone O-rings would harden; fluorocarbon seals might shrink. Fluorosilicone O-rings survive both conditions, helping mechanics avoid repeat repairs. The same logic applies in aerospace: refueling systems, actuators, and control valves all demand components that don’t give up when the environment fluctuates between –50°C at altitude and hot surfaces near the engine. In heavy machinery ...
Read more

Industrial Seal Standards Upgraded in China: New National Guidelines Emphasize Carbon Neutrality

Image
  As China accelerates its path toward carbon neutrality, industries across the board are undergoing structural and regulatory transformation. Among them, the industrial sealing components sector is now adapting to a new wave of standards aimed at improving environmental sustainability. The recent upgrading of national standards (GB standards) for industrial seals reflects the government's commitment to aligning product performance with low-carbon goals, energy efficiency, and green manufacturing practices. Background: The Push for Green Transformation Industrial seals —such as O-rings, oil seals, and gasket materials—are widely used in automotive, petrochemical, power generation, and manufacturing sectors. While they are small in size, their role in preventing leaks, conserving energy, and ensuring system safety is enormous. In the past, most standards in this field focused primarily on mechanical strength, thermal resistance, and fluid compatibility. However, under...
Read more

How to Choose the Right Seal for Every Industrial Duty

Image
Industrial seals are small components with disproportionate influence. A failing shaft seal can stop a production line or require a costly gearbox rebuild; choosing the wrong O-ring can mean repeated field returns. For distributors, wholesalers and maintenance managers, clarity about “which seal for which duty” shortens lead time and reduces warranty risk. Below is a practical, experience-based run-through. Common seal families and where they fit O-rings : the universal basic seal. Used for static flange sealing, low-speed rotary and reciprocal joints. Material choices matter: NBR (general oil resistance), FKM (higher temperature and chemical compatibility), silicone/VMQ (low temperature and certain food-grade uses), and fluoro-silicone for specific fuel resistance. For dynamic sealing, consider friction and lubrication. Lip/Oil seals (rotary shaft seals) : For rotating shafts in gearboxes, motors and pumps. Typical design includes an elastomeric lip, spring preload and m...
Read more